Tyco 508.033.050 MZX-E Extinguishing Control Panel

Tyco 508.033.050 MZX-E Extinguishing Control Panel

The MZXE gaseous extinguishant control panel is powerful yet user-friendly and is designed and manufactured to a high standard. The panel features approval to BS EN 12094-1:2003, BS EN 54-2 and 4 and is designed to BS 7273 part 1.

The panel has extensive configuration options but is easy to install, programme and operate. The removable chassis enables the engineer to "first fix" an empty cabinet and then fit the chassis at the commissioning stage. This is supported by comprehensive documentation on commissioning, operating, maintenance and fault finding. In addition there is a comprehensive range of compatible accessories available to meet most customer requirements.

Features

• Comprehensive facilities for gaseous extinguishing systems
• Monitored inputs for gas discharged, gas low, isolation valve closed/abnormal, gas trapped in manifold
• Control inputs for auto/manual, gas hold, gas abort
• 1 minute actuator cut off option
• Monitored actuator/solenoid release
• Extensive disablement options
• Common fire, fault, relay / monitored output facilities
• 1st, 2nd, 3rd stage and gas discharged relay / monitored output facilities
• Reset relay facilities
• Intrinsically safe barrier settings
• Metron or solenoid compatible
• Single or double knock operation
• Pre-discharge delay adjustable from 0 to 60 seconds
• Discharged indication with or without pressure switch
• Inhibit silence alarms until gas discharged
• Latching or non latching fault indication option
• Option for rapid buzzer pulse when gas imminent
• One man zone and sounder test
• Approval to BS EN 12094-1:2003 additional options
• Approval to BS EN 54-2 and 4
• Designed to BS 7273-1:2000
• Easily removable chassis