Protec 6300 Fire Alarm Control Panel (1, 2 & 4 Loop)

Product Code: 6300

Please Contact Us for Price & Availability.

Protec 6300 Fire Alarm Control Panel

The Protec Algo-Tec 6300 is an interactive digital addressable fire detection and alarm system ideally suited for small, medium & large sized buildings such as nursing homes, hotels and offices. The control panel is designed and manufactured by Protec to comply with EN54-2 & 4. The control panel is available as surface or recessed mounted with a moulded polycarbonate hinged door finish in storm grey, or optionally with polished solid brass or brushed stainless steel finish for recess mounting only.

Up to 32 Algo-Tec 6300 control and repeat panels and illuminated zonal mimics can be interconnected using the optional add in 6300 network card. Wired as a loop the networks dual channel fault tolerant RS485 ensures that no single fault can disable the system. In the event of a multiple faults, each panel will function independently. The network can be wired using copper or fiber optic cables.

Each 6300 control panel is equipped with 1, 2 or 4 high capacity Algo-Tec digital addressable data loops, with up to 191 address capacity per loop. The total panel devices are restricted to 512 inputs to comply with EN54 part 2. In addition to sensors, interfaces and manual call points the loop can also support loop powered sounders, beacons and optical beam detectors. Loop powered sounder bases adopt the sensor address to increase the capacity of loops still further, resulting in reduced cabling requirements, simplified installation and associated cost savings.

Key Features

High specification interactive digital addressable fire detection and alarm system, providing a cost effective solution for small, medium and large sized builds and sites
Up to 32 control panels, repeats and illuminated zonal mimics can be networked enabling system design and expansion to be easily achieved to suit the site for economic wiring and operational convenience
Wires as a loop, the network’s dual channel RS485 link ensures no single fault will affect the system
An extensive range comprising loop powered alarm sounders, beacons, interfaces, manual call points and sensors can all be connected to the nearest control panel using a single 2-core cable for each of the high capacity loops (up to 4), accommodating up to 191 devices per Loop, 512 maximum per panel.

Technical Data
Alarm Load	Maximum 3A with integral power supply unit
Auxiliary Output Supply	Supply 24V dc fused at 250mA.
Dimensions	440(W) x 385(H) x 144(D)
Display	Backlit liquid crystal display 2 lines of 40 characters
Fault Monitoring	Fully fault monitored to EN 54-2
Fault Output	Single pole changeover contacts (1A rated @ 24V)
Humidity	85% Non-condensing
Integral Charger	3A dc Switch-mode.
Number of Loops	1,2 or 4 loops, each with 191 address capacity. Total panel capacity is restricted to 512 Input addresses to comply with EN 54-2. Algo-Tec™ 6000 Protocol.
Operating Temperature	0 - 40°C
Power Supply	Mains 230V ac nominal ± 10%
Standby Load	90mA 115mA 170mA
Voltage	21.5 - 30V dc
Zones	32 Zone LED’s plus twin red common fire indicators