Zeta SCM-ZMM Conventional Zone Monitor - 6 Circuits

Zeta SCM-ZMM Conventional Zone Monitor - 6 Circuits

The SCM-ZMM is a six zone monitor module that is designed to be DIN mounted inside of a Smart Connect Multiloop control panel. It’s powered and interfaced to the panel via a RJ45 connection.

The module has six conventional zones which can be typically used for conventional devices and/or for special detectors that are not available in addressable form such as UV detectors, aspiration and beam detectors etc.

The module monitors and transmits the status (normal, open, short, or alarm) of a zone with the detectors to a control panel. Each zone input can be programmed to either give an Alarm signal or a technical alarm signal when active. The SCM-ZMM is a six zone monitor module that is designed to be DIN mounted inside of a Smart Connect Multiloop control panel. It’s powered and interfaced to the panel via a RJ45 connection.

The module has six conventional zones which can be typically used for conventional devices and/or for special detectors that are not available in addressable form such as UV detectors, aspiration and beam detectors etc. The module monitors and transmits the status (normal, open, short, or alarm) of a zone with the detectors to a control panel. Each zone input can be programmed to either give an Alarm signal or a technical alarm signal when active.

Key Features

• Designed to EN54 Part 2
• 6 x Conventional Zones
• Each zone is monitored for open & short circuit
• Extensive front unit status indications
• Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with unit)
• Each zone input can be configured as either Alarm or Technical Alarm