Tyco 516.900.104 712H Fixed 60°C Detector - Marine

Tyco 516.900.104 712H Fixed 60°C Detector - Marine

The 712H uses fixed temperature sensing. The 712H is a category A1S heat detector. A1 denotes a static response temperature of 54°C to 65°C (EN54-5). The suffix S denotes that the detector does not respond at a lower temperature, even at high rates of rising air temperature.

The 700 series detectors are for use in conventional two wire detection systems, where detectors are normally connected in zones. Each detector samples the ambient air every five seconds and if a fire condition is detected, a signalling current is drawn from the zone causing the Control and Indicating Equipment (fire alarm panel) to provide an alarm response for that zone.

Key Features

• Marine
• Uses fixed temperature sensing
• Category A1S heat detector
• Designed for use in conventional two wire detection systems
• Drop-in replacement for, and are backwards compatible with the legacy 600 Series
• Approved by major classification societies for use on vessels
• Superior performance, reliability and false alarm rejection
• Designed for fast, easy installation
• Low operational voltage
• Compatible with 4B, 4B-D, 5B and 5B-D bases
• Approval to EN54, MED and IACS
• Ingress protection IP55 (installed with deck head mount)

Whilst offering full advice, support and field support services for the equipment listed, please note that we are an independent organisation, not affiliated with Tyco Marine or JCI Marine & Navy operations.