Cooper Menvier NX16 16 Line Network Panel
- Part Number: NX16
- Categories: EVC Controllers (Evacuation Voice Communication / Disabled Refuge System / PAVA)
- £1,087.13 (£1,304.56 inc VAT)
Cooper Menvier NX16 16 Line Network Panel
The NX16 is a 16 Line Network Panel designed for use with the VoCALL Network. If you're looking for an emergency voice communication system for a large project, such as a high rise building, or if future expansion is a key concern, VoCALL 16 gives you that added flexibility. By connecting one or more network panels (NX) to a main panel (MX) you can increase reach of the system to suit your requirements.
The VoCALL 16 is a high specification, digital, loop driven, intelligent Emergency Voice Communication System, offering sophisticated functionality along with a simple and intuitive end user interface.
This network* version enables a system installation of up to 32 main panels (MX) and network panels (NX) in any combination (a minimum of 1 MX is required). With a maximum of 16 outstations per panel, a total system size of 512 outstations is possible, all connected and communicating via isolated fault tolerant loops.
The system also uses digital audio communication to achieve high audio quality and intelligibility when it matters the most. The use of isolated loops also reduces labour and material cost along with potential for wiring errors associated with traditional spur systems.
VoCALL16 is designed to ensure the simplicity of future expansion. Continuous fault monitoring and reporting ensures high availability. Extensive time stamped logs ensure ease of debugging and recording for compliance.
Key Features
- Network capacity of 512 outstations
- Up to 32 panels (main/network) in a loop
- Up to 16 digital outstations per panel
- 4 core loop configurations (two for power, two for data)
- Simple to design network
- At least one main panel is required
- Any combination of panels (MX/NX) possible
- Any combination of outstations possible
- Centrally controlled by a main panel
- Easy to install and operate
- Automatic soft addressing of panels and outstations
- PC based application for configuration
- Complex call routing is possible
- Extensive time stamped logs on SD card
- Large graphical user interface
- PIN protected user access
- Fully compliant with BS5839-9
Cooper Menvier - NX16 - Installation Guide (2.64MB)
Cooper Menvier - VoCall Installation and Operation - Manual (4.7MB)
Have you got a question about this product?
Email us or Call Us on +44 (0)1254 207532













