Aico EI3028 Series Heat & Carbon Monoxide Multi-Sensor Fire Alarm

Aico EI3028 Series Heat & Carbon Monoxide Multi-Sensor Fire Alarm

The Ei3028 is a Multi-Sensor Heat and Carbon Monoxide (CO) Alarm. It contains our proven fast acting Class A1 Thermistor sensor to detect fire as well as our proven electrochemical CO sensor to detect the presence of toxic levels of CO. This provides protection from both Fire and CO in one alarm. The Ei3028 runs on 230V AC mains power. In the event of mains failure, the 10 Year+ built in tamper-proof rechargeable lithium cells will provide back-up supply and continuous operation.

The Ei3028 contains AudioLINK technology, which allows you to extract real time data from the alarm directly to a smartphone or tablet via the AudioLINK App. During an alarm, “Fire” or “CO” indicators will flash on the Alarm to indicate what has been detected. There will also be a different alarm sound depending on what has triggered the alarm. The Ei3028 is fitted with a large Test/ Silence button to facilitate frequent testing of the alarm and system. The silence function allows the alarm/ system to be silenced in the case of a false/ nuisance alarms and low battery/ fault beeps.

The Ei3028 self-tests its sensors, battery and internal circuitry every 48 seconds. Any fault condition found will be indicated by a combination of yellow LED flashes and/or audible beeps. SmartLINK compatible - plug in an Ei3000MRF module for wireless interconnection, data extraction and real-time notifications of alarm activations and events via the SmartLINK Gateway and Portal.

Key Features

• Sensor Type: Thermistor & Electrochemical CO
• 10 year life
• Easi-fit base
• Heat or CO indicator on alarm head
• AudioLINK data extraction technology
• Compatible with other Aico mains powered units
• Add and Ei3000MRF for wireless interconnection and data extraction
• Mains powered with 10 year rechargeable lithium cell back-up
• Contains both a Heat and Electrochemical CO sensor – Heat and CO coverage in one alarm
• Supply Voltage: 230V AC, 50Hz
• Power Consumption: 0.25W (standby)
• Battery Back-up: Rechargeable lithium cells
• Sound Level: 85dB(A) at 3m
• Button Test: Checks sensors, electronics, LED displays and sounder
• Silence Function: Silences alarm for 10 minutes if alarm is triggered by heat or once for 4 minutes in case of CO event.
• Silence Function: Silences fault beeps for 12 hours
• AudioLINK: Enabled
• SmartLINK: Compatible via the Ei3000MRF Module
• Indicator LED’S: Green – power. Red – pre-alarm (CO only)/ alarm/ silence mode/ memory or battery event. Yellow – fault event
• Memory: Records last alarm event
• Fixing: easi-fit base (supplied)
• Operating Temperature: -10°C to 35°C
• Humidity Range: 15% to 95% relative humidity
• Plastic Material: UL 94 V0 flame retardant
• Dimensions – Product: 150mm x 66mm
• Dimensions – Boxed: 180mm x 155mm x 72mm
• Weight: 318g (product only), 384g (boxed)
• Guarantee: 5 years
•