Aico Ei100MRF RadioLINKPlus Module

Please note: This product is now obsolete, the recommended replacement is the Aico Ei3000MRF SmartLINK Module.

Aico Ei100MRF RadioLINKPlus Module Compatible with 160e Series

Aico’s award winning RadioLINK technology has also evolved into RadioLINK +. The 160e Series alarms and Multi-Sensor Fire alarm, Ei2110e can now interconnect wirelessly with other RadioLINK, RadioLINK + & SmartLINK alarms and accessories via this plug in module. The E100MRF  just slots into the alarm and is automatically activated ready to be interconnected or ‘House Coded’ in with the rest of the system.

The Ei100MRF module simply plugs into the back of the 160e Series & Multi-Sensor Fire alarm, Ei2110e allowing wireless interconnection between enabled alarms and accessories.

RadioLINK+ has made it easier to expand existing systems. Previously, if you wanted to add another RadioLINK alarm or accessories into an existing RadioLINK system, each alarm would have to be manually put into House Code mode. With RadioLINK+ only one alarm in the existing system needs putting into Remote House Code mode along with the new alarm/accessory that needs adding.

RadioLINK+ has an enhanced self-monitoring function that recognises system tampering or alarm head removal. Each alarm in the system will pair up with another alarm. At regular intervals, these two alarms will communicate with each other. If someone has removed Alarm 1 from its base, Alarm 2 will not get a response and log it into its memory and change its indicator light. It will also send an ‘Alarm Removed’ signal that can be used to trigger a warning to a third party device, e.g. a warden call or panel system, if connected to a module such as the Fire/CO Alarm Interface Ei414.

Key Features

• Add this to an Ei160e series alarm to allow for RadioLINK+ interconnection and data extraction
• Compatible with other Aico wireless interconnection products
• Simple plug in modular design
• Powered through the alarm head
• RF Monitoring
• Remote alarm learn entry
• Multi-path communication protocol
• Transmits, receives and repeats RF specific data
• Interconnect up to 12 hardwire and/or communication alarms and devices
• Tricolour LED to indicate RF status
• Eliminates tricky wiring runs
• Saves time, mess and money at installation
• Makes it easier to add in new alarms and accessories
• Data extraction capabilities
• Alarm self-monitoring function
• Supply Voltage: 230VAC – 50Hz
• Battery Back-up: Rechargeable lithium battery
• RF frequency: 868.499Mhz RadioLINK protocol
• RF Power: +5dBm
• RF Range: >100 Meters in free air. 30m max from start to end of alarm system
• Operating Temperature: 0 to 40°C. Storage – 0 to 35°C (in a dry area)
• Humidity Range: 15% to 95% relative humidity
• Indicators: Blue LED for RF signals
• Plastic Material: UL94VO
• Dimensions – Product: 80mm x 18mm x 16mm (excluding aerial)
• Weight: 10g (46g including packaging)
• Approvals: CE certified / EN 300220-3 (RF) / EN301498-3 (EMC)