Ziton Z6BS-1 Conventional Surface Mounting Detector Base
- Part Number: 83901
- Categories: Ancillary (Conventional Fire Alarm Equipment)
Please note: This product is now obsolete, for further assistance or available alternatives please contact us.
Ziton Z6-BS1 Conventional Surface Mounting Detector Base
Z6-BS1 detector base allows any Z600 conventional detector to be removed or replaced without disconnecting wiring from detector terminals. Detectors plug into the base units with a simple twist and lock action, allowing quick and easy removal for cleaning and servicing, or reselection of detector type should the usage of the protected area change.
Designed for systems where head out continuity is not a requirement, detector line monitoring is provided by a suitable end of line resistor, connected across the out terminals of the final device in the circuit.
Robust wiring terminals Forming an integral part of the overall detector assembly, the Ziton Z6BS-1 base is provided with slots for screw fixing to either surface wiring plates, or conduit boxes with screw fixing centres between 50mm and 90 mm.
Ziton Z6BS-1 bases feature robust wiring terminals with captive clamping washers to ensure secure wiring termination. The bases are of shallow design with ample space to accommodate cables of all types. Terminals are provided inside the moulding for the connection of a remote LED when required.
In order to prevent unauthorised removal of a detector from its base, an automatic locking breakout is incorporated into the interior of all detector mouldings. If the breakout is removed, detectors can then only be released from their bases by use of a Ziton detector head picker (Z-PH-2). The locking facility is an easily applied option, often taken on site, at the system commissioning stage.
For systems complying with the recommendations of BS5839 Pt1, where the removal of a detector from its base must not affect the operation of devices wired further down the line, the Z6-BS5 base should be installed.
Key Features
- Common to all Z600 series detectors
- Automatic locking option
- Ease of installation
Have you got a question about this product?
Email us or Call Us on +44 (0)1254 207532