Ziton A45E-2 Addressable Interface Module

Ziton A45E-2 Addressable Interface Module

The A45E-2 addressable interface is designed for installation within the enclosures of equipment associated with fire detection systems. The unit is installed directly onto the ZP loop wiring, carries a system address and enables signals from associated equipment to be interfaced into the fire alarm system. Input signals are fully displayed at the control panel and can be programmed to activate any system output. By routing loop wiring and installing interfaces adjacent to input equipment, system integrity is decreased and the need for long spur wiring between equipment terminals and the fire alarm interface is eliminated.

Complying with EN54 Part 18 the A45E-2 can be installed singly, or used in groups to provide multiway inputs from equipment such as volt free, zonal outputs from conventional fire alarm systems or flow valves from sprinkler installations. Housed in a low profile, single width moulding the interface is designed to clip directly onto a standard DIN rail fixing or be installed in a SMB-DIN100 box (two unit capacity), or a SMB-DIN200 box (four unit capacity).

A red LED indicator positioned on the front moulding flashes when the interface has operated, providing clear identification of the input signal source. Installed as part of an analogue addressable system, up to 127 line devices (sensors, callpoints or interface units) can be connected to each of the control panel loops. All loop devices incorporate switch settings enabling them to be assigned a unique address, which is polled by the panel every two seconds.

Key Features

• Addressable input interface unit
• Complies with EN54 Part18
• Low profile
• DIN rail mounted
• Accepts normally open input circuits
• Monitors input circuit wiring for open or short circuit faults