Apollo XPA-CB-14018-APO XPander Wireless Sounder Base & CS Heat Detector

Please note: This product is no longer available, the recommended replacement is the Apollo XPander CS Heat Detector (XPA-HT-11171-APO) with the Apollo XPander Combined Sounder Base XPA-WB-14036-APO.

Apollo XPA-CB-14018-APO XPander Wireless Sounder Base & CS Heat Detector

The XPander Combined Sounder and Detector is a wireless and designed to provide one point notification and detection.

Brand Information:

XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal, pre-alarm, fire or fault states to the radio base which transmits the information to the interface.

The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery, detector contaminated, detector tamper and low signal strength fault conditions.

Key Features:

• Wireless
• Available with a choice of XPander detectors
• Bi-directional (monitored) radio platform
• A choice of 4 tone pairs
• Certified to EN54 Part 25