Scope TLINKLT Telemetry System for One-way Link (DL3-05-12V & RX10LT)

Scope TLINKLT Telemetry System for One-way Link (DL3-05-12V & RX10LT)

T-Link takes a 5-zone DigiLink transmitter and combines it with a RX10 receiver and two aerials to produce an ‘off the shelf’ one-way radio link between fire or intruder panels. The transmitter has five input zones which can be triggered by volts-free opening or closing contacts or can be configured to accept ’voltage applied’ or ‘voltage removed’.

The system is supplied pre-configured to operate ‘change-of-state’, so a closing contact at the transmitter sends a signal to the receiver to activate the corresponding zone output relay. When the transmitter input is de-activated, the relay is deactivated so the output actually ‘follows’ the input. A programming kit is available if you need to reconfigure the system. Additional transmitters and receivers can be added when needed.

This can simply be achieved by installing Digilink transmitters and receivers adjacent to the fire or security panels where their relay contacts can be hard wired into the output/ inputs of the panel in order to provide wireless alarm signals between buildings. For roaming fire marshals and security personnel the serial output of the receiver can be connected to the Scope Connexions Range of paging transmitters in order to send pre-programmed text messages to pocket worn pagers.

It is also possible to connect the printer output of analogue addressable panel to a serial port of the Connexions transmitter in order to transmit real time panel messages to the pagers thus saving valuable time by not having to view the message at the panel. The same format could also be deployed for access control, plant monitoring, lone worker and care home applications where staff has to be made aware of situations arising from automated or manual inputs.

Key Features

• Scope RX10 fixed telemetry receivers are available as 12V DC or mains powered units which can be used with all Scope UHF POCSAG transmitters
• 10 individual zone relays + common activity relay
• Each zone is individually switchable and can be programmed for latching, momentary or toggle operation
• Front panel status indicators for all zones
• Fully programmable with PC configuration software
• Global Reset by keyswitch or transmitted RIC
• Supervised 'transmitter in service' facility
• RS232 serial port for data logging or repeater functions
• Signal strength indicator (not Lite version)
• 'LT' version is fitted with Class 2 receiver