Vesda Xtralis REDFLEXI25B 25mm Flexible 1m Long Bend

Please note: This product is no longer available under this part code, please use: PIP-021.

Vesda Xtralis REDFLEXI25B 25mm Flexible 1m Long Bend

With over 250,000 aspirating smoke detectors installed worldwide the VESDA name has become synonymous with high quality and outstanding performance. An aspirating smoke detection system, however, only performs at its best with a well designed and installed quality pipework system. Xtralis, manufacturer of VESDA detectors, recognised this requirement and in 1997 launched its VESDA Pipe and Fittings range.

• Always use tools specifically designed for plastic pipe.
• Protective gloves are recommended for use when solvent cementing. If hands come into contact with cement, use a waterless abrasive soap.
• Avoid sources of heat or open flames when solvent cementing. Do not smoke.
• Always chamfer and deburr pipe ends.
• Use the proper solvent cement (note; air shipments of solvent cement are forbidden by law).
• Always replace lids on cans when not in use.
• Never dilute solvent cement.
• Keep jointing surfaces dry in wet weather.
• Avoid direct inhalation of fumes. Use in a well-ventilated area.
• Wipe up spills or leaks immediately with clean lint free cloth or paper towels.
• Follow recommended cure times prior to testing the system.
• Prevent excessive solvent cement from running into the pipe or fitting socket.

The Integrity of air sampling systems may be affected if proper CPVC solvent cement is not used. The Safety Crew disclaims responsibility for any air sampling pipe system constructed with cements other than those recommended.

Please note: The PIP-021 is equivalent to the REDFLXI25B.