Talentum Single IR Flame and Spark Detector 16580

Talentum Single IR Flame and Spark Detector 16580

The Talentum® Single Infra-Red (IR) Spark Detector responds to low frequency (1 to 15 Hz.) flickering IR radiation emitted from sparks and other hot objects during combustion. IR flame flicker techniques enable the sensor to operate through a layer of oil, dust, water vapour, or ice. Most IR spark sensors respond to 4.3?m light, emitted by hydrocarbons.

By responding to 1.0 to 3.0?m light emitted by sparks, early stage fires can be rapidly detected. The single IR photoelectric detector responds to IR wavelengths, emitted from glowing embers and sparks and is ideal for these applications. The combination of filters and signal processing allows the sensor to be used without risk of false alarms on dark machinery and ductwork.

Key Features:

• Fast response time for enclosed and dark areas
• High Sensitivity to Embers
• Selectable Output Options; Conventional 2 wire, 4-20mA, Relay Contacts (Fire/Fault, Pre-alarm - Latching or Non-latching)
• Selectable Response Speed
• Remote Control Self-Test
• Low Power Consumption
• Die cast zinc alloy housing
• Ideal for use on machinery protection applications
• Continues operation at temperatures up to 55°C

Applications:

• Agriculture
• Bed Fillings
• Chipboard/MDF Manufacture
• Dryers
• Dust Collection/Filters
• Textiles
• Paper Production
• Woodworking