Patol ADW535 Line Type Heat Detector

Patol ADW535 Line Type Heat Detector

Where conventional fire detectors reach their physical limits the SecuriSens ADW 535 line-type heat detector comes into play.

The intelligent line-type heat detector works perfectly, even under the most difficult conditions. Whether the fully automatic monitoring of large areas, resisting corrosive gases, extreme humidity and high temperatures, or differentiating between false alarms and real danger – the list of requirements for a state-of-the- art line-type heat detector is both long and detailed.

The integrated SecuriSens ADW 535 line-type heat detector combines a proven functional principle with the latest developments in sensor and processor technology.

A sensing tube filled with normal air is installed in the area to be monitored. A fully electronic pressure sensor permanently records the pressure in the sensing tube. This is monitored constantly in the processing electronics and compared with the alarm criteria. Diverse setting options are offered directly on the device via EasyConfig or using the comfortable ADW Config tool for perfect adaptation to existing environmental conditions. The Dynamic Heat Watch (DHW) technology ensures that a brief temperature increase caused by the ambient conditions does not result in a false alarm.

The system is optimally protected against failures: if there is suspicion of a leak in the sensing tube, a monitoring device generates a defined overpressure in the sensing tube at specific intervals. If the registered pressure deviates from the saved default value (e. g. due to a leak or crushed tube), then the computer immediately triggers a fault.

Thanks to the extremely tough sensing tube, the SecuriSens ADW 535 can be deployed in many applications where conventional fire detectors do not work. With its long service life and maintenance-free design, the ADW 535 is also ideal in applications where the detection properties must remain constant over the entire product service life.

Key Features

• Integrated line-type heat detector
• 1 or 2 sensing tubes (Double Tube Technology)
• Based on proven technology
• Fastest heat detector with fully programmable  response behaviour plus differential and maximal  evaluation
• Intelligent alarm verification with DHW (Dynamic Heat Watch)
• Available as standard and Heavy Duty version (with ATEX approval)
• Sensing tubes of copper, stainless steel, or Teflon which can withstand extremely severe ambient conditions and high temperatures
• High level of functional dependability thanks to fully automatic sensing tube monitoring
• High-performance software: ADW HeatCalc for planning and ADW Config for configuration and maintenance
• EN54 pt 22 Vds and UL/FM approved