Morley IAS MI-IM10-S2I Ten Input Monitor Module

Morley IAS MI-IM10-S2I Ten Input Monitor Module

The IM-10 ten input monitor module to provide an interface to a normally open contact device such as plant outputs or flow switches. The first address is set from 01 to 90; the other modules are automatically assigned the next nine addresses; up to four unused addresses can be disabled. The supervised state: normal, open circuit fault or short circuit alarm is sent back to the control panel.

Key Features:

• Maximum Standby Current 3.50mA (Blinking LED once every 5 seconds)
• Maximum Alarm Current 60mA at 32V assuming all ten LEDS solid on
• Maximum Supervising Line Wiring Resistance 1000 Ohms
• Maximum Line Voltage 11.3VDC
• Maximum Line Current 240?A
• Min/Max Wire Gauge for Terminals 1.0mm2 to 2.0mm2