Tyco 516.800.963 LPAV800-R L/P Symphoni Sounder/Beacon (Indoor Use) Red

Please note: This product is now obsolete, the recommended replacement is the Tyco 576.080.012 P80AIR Addressable Red Wall Sounder VID with a 557.080.011FC Red Deep Surface Back Box.

Tyco 516.800.963 LPAV800-R L/P Symphoni Sounder/Beacon (Indoor Use) Red

Key Features:

• Loop Powered - Reduced installation costs
• High Output/Low consumption - Lower lifetime costs
• Indoor and Outdoor models - Same sounder tones in all areas
• Sounder/LED Beacon Version - DDA Compliant
• 16 Tones and 2 Flash rates - Suits individual requirements
• Reflective Sound Monitoring RSM - Reassurance that ALL sounders are working
• Integral Line Isolator - Saves cost and installation time

Models Available:

The sounder only models are available with a red or white housing suitable for indoor use and an IP65 rated red housing for outdoor applications.

The audio/visual models, which incorporate a highly efficent LED beacon, are also available with a red or white housing for indoor use and an IP65 rated red housing for other outdoor applications.

Up to now sounder circuits have been monitored up to the EOL but not the individual sounders, fault detection has relied on human feedback from the weekly tests that should be carried out to meet the requirements of BS5839.

The LP Symphoni utilising Reflective Sound Monitoring (RSM) employs a transducer to actively monitor the units sound output during the weekly sounder test and will report back to the MX controller if it fails to detect the sounder operating when it has been commanded to, this ensures that the LP Symphoni range of sounders will in the unlikly event of a fault, display it immediately on the fire controller and is therefore not dependant upon the staff within a building reporting a sounder failure.

Built-in Isolation:

As the line isolator is now integral to the device the need for separate line isolation devices is reduced.

Tones:

16 Tones are available from the sounder, which include tones compatible with the 802SB sounder base and the LPBB520 (Loop Powered Besson Banshee). Dutch slow whoop and the DIN 1Hz sweep are included. Two sound levels 103dB & 90dB.

MX Consys:

The LP symphoni range of devices will be fully supported by Consys V10 and later, the point input dialog box provides and easy method for setting the tones, volume and flash rate of the device. The only operation required at the device is to set the address using the 801AP device programmer.