Lexicomm ViLX-ACA Assist Call Alarm WC System

Please note: This product has now been replaced by the Vox Ignis ViAC-ACA-SS Lexicomm “Assist Call” Alarm WC System.

Lexicomm ViLX-ACA Assist Call Alarm WC System

The ViLX-ACA provides a simple solution to integrating emergency assist alarm call systems within an EVCS, providing a single display point for all disabled calls within a building. It can be used on a dedicated line, or may share a line with the ViLX-OSB disabled refuge outstation (as long as fire rated cable is used), where operation of the refuge point overrides the assistance call (ideal where a disabled toilet is adjacent to a refuge lobby). When a call is made the over-door and cancel units emit a two tone siren with the “Halo” flashing, when the call is acknowledged from the EVCS controller the “Halo” on these units lights steadily and the tone double beeps every 15 seconds to reassure the caller help is on the way. As the ViLX-ACA is connected to a Lexicomm master station the plates and cables are fully end of line monitored and battery backed as standard. The ViLX-ACA plates are supplied with a brushed stainless finish and a Blue HALO to aid location.

Kit Contains:

• 1x Over-door Plate
• 1x Cancel Plate
• 1x Pull Cord

All Lexicomm Emergency Voice Communications Systems (EVCS) are designed to comply fully with the requirements of BS5839-9:2011 for use as a disabled refuge system (DRS) with integrated Emergency Assist Alarm System. The ViLX-ACA kit provides a BS8300 compliant accessible toilet solution including the “Acknowledge” signalling required for remote locations.

Key Features:

•  Compact Design
•  BS8300 “Acknowledge”

Feature

•  High volume sounder
•  Blue “Halo”
•  Flush or surface mounting
•  Braille enhanced Cancel

Button

•  Stainless Steel as standard

Suitability

The ViLX-ACA is an emergency assist alarm system as defined in BS8300, and is designed to be used by the public as an emergency assistance alarm call point, and integrated into the EVCS as allowed by BS5839pt9:2011 The ViLX-ACA kit can be expanded using additional plates making it suitable for accessible bedrooms at the locations described in Building Regulations Approved Document M and BS8300.

Mounting the Unit

The ViLX-ACA components are not supplied with back-boxes as they can be used with any “MK” style single back-box over 25mm deep. To accept cable glands the back box needs to be 35mm deep) including metal clad surface types and plastic plasterboard liner boxes. The units should be mounted as shown below to comply with the requirements of Building Regulations Document M (Access for the Disabled) and BS8300-2:2018. When flush mounting, use the back-box manufacturers recommended cut out.

Please Note: additional plates can be added