Klaxon SWG-0032 GP6 Motor Siren - 400VAC - 50Hz

Klaxon SWG-0032 GP6 Motor Siren - 400VAC - 50Hz

The GP range of conventional motor-powered sirens provide a basic solution to address wide area mass alert signalling for all industrial, civil, commercial and environmental requirements. The products are of simple rugged construction and provide a low frequency traditional air raid sound.

Key Features

• 475Hz constant tone signal for the GP6 & GP10 sirens
• Roughly omni-directional sound coverage which peaks in the direction of the front stator face
• 400Vac +/- 10% 50Hz 3 phase nominal power supply requirement
• Operating temperature range for the standard GP6 & GP10 units of -20 to +60 degrees C
• Cast aluminium & steel construction
• Environmental rating of IP55
• If the power supply to the sirens is pulsed to enable the siren to produce a ‘wail’ tone then the maximum run time of the siren is reduced from continuous for constant tone to 15 minutes
• Control units can be supplied to enable the siren to produce the ‘wail’ tone signal with associated control switches
• If mounted in a climate where icing can occur the unit should be fitted with thermostatically controlled heaters
• The Motor windings are tropicalized as standard
• Anti-condensation heaters for the motor can be supplied