Kentec KFC3-ARRD Fire-Cryer Extinguishing Voice Sounder with Visual Indicator

Kentec KFC3-ARRD Fire-Cryer Extinguishing Voice Sounder with Visual Indicator

Kentec’s Fire-Cryer Plus voice sounder with visual indicators is an alternative to electronic sounders/bells/strobes, providing system specific voice messages to occupants.

In areas where extinguishing systems are installed, clear and concise indication of the system status is critical to ensure the area is evacuated before extinguishing gas is released.

The kit compromises two wall mount sounders with visual indicators and a control module, together providing unambiguous voice messages alerting to stages of alarm.

The system requires no special wiring and can be retro fitted to existing installations.

Sounders are configured with 4 pre-configured tones and messages:

• Pulsed Bell tone - "1st stage extinguishing release warning, Please Evacuate the area, Evacuate the area!"
• Pulsed Banshee - "Extinguishing Release Imminent"
• Pulsed Banshee - "Extinguishant released"
• No tone - "Extinguishant gas release on hold"

Visual Indicator - Red 2 Cd or 8 Cd settings

Sounder output - Tone 100dB(A), Voice 95dB(A)

Operating voltage 20-28V DC

Alarm current - 60mA Max (dependent on volume and indicator settings)

Red ABS housing with deep mounting base, rated IP66

Key Features

• Two voice enhanced sounders and controller PCB included
• Optimised for use with Kentec extinguishant releasing panels
• Retro fit replacement for electronic sounders or bells
• Four unambiguous voice messages
• Sounders with integral visual indicators
• Approved to EN54-3
• Controller PCB provides two sounder outputs
• High sound output
• Low-current consumption
• Monitored (EOL)