Cooper Menvier FC18 Addressable Fan Controller (18 Channel, 19 " Rack Mount)

Cooper Menvier FC18 Addressable Fan Controller (18 Channel, 19 " Rack Mount)

The FC18 Fan Controller can be connected to a Cooper analogue addressable fire alarm control panel by means of the comms Loop utilizing only one address.

There are 6 channels per Fan Controller capable of controlling & indicating 6 individual Fans.

All FC18 Fan Controllers are programmed individually by means of the unique easy to use Cooper Site Installer PC software.

Each channel is programmed to an output device and feedback input device that can reside on any loop on any panel on the network to control & monitor the status of the Fan.

The CFC301 which takes 2 addresses on the loop, one for the control output which appears as a ZMU and one for the feedback input which appears as a technical input.

The MCIM can also be used as the feedback input.

The MCOM can also be used as the control output but is limited to 20 per loop.

The MCOM-S can also be used as the control output and is limited to 60 per loop but as it auto-learns and behaves like a sounder it will activate during an evacuation.

The MCOM-FC can also be used as the control output and is limited to 60 per loop but even though it auto-learns as a sounder it will not react to evacuations