Hyfire HFI-OM-RD-01 Din Rail Single Relay Output Module

Please Note: this product is no longer available, please Contact Us with any questions.

Hyfire HFI-OM-RD-01 Din Rail Single Relay Output Module

Single relay output module DIN rail mounting. VMDC120 contains built in loop isolator which provides short circuit protection for the detection loop. The product is not EN54 approved for installations within the EU.

The Axis single channel output modules are loop powered, designed around a fully digital protocol and provides form C changeover contacts for control of auxiliary devices such as fire shutters. The output channel is a normally de-energised relay switched on by a command from the control panel. The unit provides a fast and secure response, and incorporates a bidirectional short circuit isolator. Connections are made using plug-in terminal blocks which will accept conductors up to 2.5mm². The unit is suitable for fixing to a standard 35mm DIN rail.

Key Features

• Short circuit isolators in each device to the requirements of EN54-17
• Auto addressing capability (by the control panel) or manually using a 20-VPU1000-ADV hand held programmer.
• Auto addressing capability (Control panel feature)
• Digital checking of double address
• Line quality information
• Bicolour (red green) LED driven by the control panel