Grosvenor JC4-ADV-C2-MLT Janus C4 Multi Controller

Grosvenor JC4-ADV-C2-MLT Janus C4 Multi Controller

The Janus C4 Multi-Blade Controller is an access control system controller for use with Janus C4 host software. It allows the connection of up to four blades which may be any combination of 2 Door Blades (Part No: JC4-ADV-BL 2D), each supporting 2 doors and 2 readers, OSDP Blades (Part No: JC4-ADV-BL-OSDP), each supporting 2 doors and 4 readers, or I/O Blades (Part No: JC4-ADV-BL-IO16), each supporting up to 8 supervised inputs and 8 volt-free relay outputs. 

The Multi-Blade Controller can be used with a number of different power supplies: a 12V external power supply (either 5A or 8A), or POE/POE+. It can be fitted in the standard Grosvenor enclosure (Part No: ADV-ENC) or an alternative enclosure. The controller supports both IP and RS485 host communications (note: if using RS-485 a Line Header will be required).

Key Features:

• Multi-Blade Controller can be powered using either a 12V external power supply (either 5A or 8A) or POE/POE+.
• Can be fitted in the standard Grosvenor enclosure (Part No: ADV-ENC-8A) or an alternative enclosure.
• Supports both IP and RS-485 host communications (note: if using RS-485 a line header will be required).
• Supports various card technologies, including proximity cards, smart cards, and even bio-metric readers, depending on the hardware used.