Grosvenor JC4-ADV-C2-MLT-2D Janus C4 Multi Controller with 2 Door Blade

Grosvenor JC4-ADV-C2-MLT-2D Janus C4 Multi Controller with 2 Door Blade

The Janus C4 Multi-Blade Controller is an access control system controller for use with Janus C4 host software. The controller kit is supplied with one 2-door blade fitted.

The 2-door blade is a plug-in unit that can be used with the Janus C4 Multi-Blade Controller, the 2-Door Blade enables the connection of two readers and two doors in JanusC4 access control systems.

The muli-controller allows the ability to fit up to 4 blades which can be any combination according to requirements. The options are 2 Door Blades (Part No: JC4-ADV-BL-2D) each supporting two doors and two readers or OSDP Blades (Part No: JC4-ADV-BL-OSDP) each supporting two doors and four readers, or I/O Blades (Part No: JC4-ADV-BL-IO16), each supporting up to eight supervised inputs and eight volt-free relay outputs.

Key Features

• Multi-Blade Controller can be used powered using either a 12V external power supply (either 5A or 8A) or POE/POE+.
• Can be fitted in the standard Grosvenor enclosure (Part No: ADV-ENC-8A) or an alternative enclosure.
• Supports both IP and RS-485 host communications (note: if using RS-485 a line header will be required).
• Supports various card technologies, including proximity cards, smart cards, and even bio-metric readers, depending on the hardware used.