Global Fire TCP/IP Communication Interface

Please note: This product is now obsolete, if you require any further information please Contact Us directly.

Global Fire TCP/IP Communication Interface

Global Fire Equipment produces a range of interfaces that allow the JUNO NET Analogue addressable Fire Detection Panel to be interfaced to GFE’s graphical monitoring software ODYSSEY. Four different interfacing technologies are available, namely:

• RS232
• RS485
• Fibre Optics
• TCP/IP

The J-NET-ADV-COMS-TCP/IP interface is used when connecting JUNO NET Main Panels (maximum of 64) to GFE’s ODYSSEY software, BMS or MODBUS using TCP/IP protocol within a Local Area Network (LAN). Both 10/100 Mbps speeds are supported by this device and the communication rate is automatically set depending on the type of network to which the device is connected. JUNO NET panels linked to ODYSSEY, BMS or MODBUS, will also need to be equipped with a QUAD-UART chip (J-NET-QUART).

This interface is easily configured using LAN communications with provided software, Internet browser or Telnet. Alternatively the interface can also be configured using terminal emulation software via the serial port provided in the form of a D-Type 9 pin miniature connector. Two Red LEDs on the interface board will assist the user when monitoring the system communication status.