Gent XENS-850 Flush Manual Call Point 470 Ohms Glass

Please note: This product is now obsolete but we do have limited quantities available. Please contact us for further information. The replacement is Gent M1A-R470FG-G017-01 Flush MCP 470 Ohms - Glass

Gent XENS-850 Flush Manual Call Point 470 Ohms Glass

Gent conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.

Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.

With the addition of a hinged transparent cover the element may be protected against accidental operation.

A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.

Key Features

• Fully compliant with EN54, Part 11
• Re-settable operating element option
• 470 Ohm resistor and Normally Open contact complete with glass
• Resistive and clean contact connections