Fireclass 576.440.017FC FC445CAV Addressable Wall Sounder VAD BC

Fireclass 576.440.017FC FC445CAV Addressable Wall Sounder VAD BC

The 576.440.017FC is a FC445CAV Addressable Wall Sounder VAD BC.

This model is compatible with FC510 and FC520 panels and should be used only with those panels. The panel display will show device type of the previous FC410LPBS and FC430LPBSB.

The Visual Alarm Device (VAD) Sounder Beacons are loop powered units that are driven from an addressable controller panel. They are available in ceiling and outdoor wall mounted variants.

The ceiling mounted variants provide a base for fitting a fire detector. Alternatively, a blanking cap is fitted.

All VAD Sounder Beacons have a built-in two port loop short circuit isolator. Settings for tones, volume, beacon flash and status monitoring are configurable using the control panel.

Selectable flash rates are:

• 1Hz (one flash every second)
• 0.5Hz (one flash every two seconds)

Key Features

• A compact and unobtrusive sounder solution
• Shorter Light Pulse for faster response
• FC445CAV is outdoor versions with a deep surface back box for use with suitable IP-rated glands and cabling
• Power and data from the loop. No additional wiring or power supplies required
• Built-in line isolator
• 16 selectable tones for FC445CAV
• Realistic Conventional Bell Tone
• 2 selectable volumes for FC445CAV
• 2 selectable flash rates
• Select the tone volume and flash rate using panel configuration software
• Coverage volume code: Open Class
• Devices per loop: Up to 44
• Flash rate: 0.5 / 1 Hz
• Dimensions (WxHxD) mm: 105x153x 97 (with I.P. BackBox)
• Sound output @ 1m: Up to 100dBA
• Body colour: Red
• Flash colour: White
• IP code: IP55
• Approvals: EN54-3, 23, 17
• Housing material: PC-ABS
• Operating temperature (°C): -25 to +70
• Storage temperature (°C): -25 to +70
• Humidity: Up to 95% non-condensing
• Pressure: Sounder SPL output quoted for 1000 mBar
• EN54-17 isolator: Yes
• EN54-3 sounder: Yes
• EN54-23 visual alarm: Yes
• Beacon intensity settings: 1
• Vibration, shock, corrosion, EMC: Complies with EN54 series requirements
• Beacon flash rates: 0.5 and 1 Hz