Baldwin Boxall VIGIL2 Slave Router BVRD2S adds 12 Inputs 16 Outputs and 12 Messages

Baldwin Boxall VIGIL2 Slave Router BVRD2S adds 12 Inputs 16 Outputs and 12 Messages

VIGIL EVAS slave units enable expansion of the EVAS BVRD2M DSP-controlled router. There are currently two models in the range.

Key Features:

• Up to five slave units can be added to each BVRD2M master - enabling a maximum total of 68 inputs, 87 outputs and 30 messages.
• Adding a BVRD2S to a BVRD2M increases the number of inputs available by twelve, the number of outputs by sixteen and adds another twelve messages.
• Adding a BVRD2SLT to a BVRD2M increases the number of inputs available by six, the number of outputs by eight and adds another six messages.
• The slave units mount directly on top of the master unit.
• To minimise rack wiring, the power and communications between master and slave units are through an internal data link.
• All connections are made to the BVRD2S using RJ45 connectors.
• The ‘bypass all call enable’ switch can be used to prevent an ‘all call’ message from being broadcast to the selected outputs. This is often used if one of the outputs is being used as a local monitor.
• The BVRD2SLT can be upgraded to a BVRD2S – providing a solution for future system expansion (this is a factory fit upgrade).