Aico Ei1529RC Alarm Control Switch

Aico Ei1529RC Alarm Control Switch

The Ei1529RC is a remote control switch that runs on 230V AC mains power. It is designed for use with 2100, 160RC and 140RC series smoke and heat alarms, and 260RC series carbon monoxide alarms.

It increases the flexibility and user friendliness of the alarms by allows the user to remotely ‘Locate, Hugh and Test’ the alarms in the system:

• Locate – The source of the alarm
• Hush – any nuisance alarms
• Test – the alarm system
• Mains Check – provides warning of a mains failure

Key Features

• Install as part of the system to get more control over your alarms
• Mains powered
• Hard wired interconnection
• Test, Locate and Silence
• Compatible with 3000, Ei2110e Multi-Sensor Fire Alarm, 160e Series alarms, 140RC Series alarms and hard wired interconnected Carbon Monoxide alarms
• Compiles with electrical safety requirements: EN61000-6-1:2007 Et EN61000-6-2:2005 (EMC Directive) and EN60065:2001 + A12:2011 (Low voltage directive)
• Carries the CE mark to indicate conformance to Low Voltage and Electromagnetic Compatibility Directives
• Wall mounted for ease of use – can be fixed with surface mount box supplied, or will fit a standard recessed box (not supplied)
• Suitable for siting at any convenient point in the property. Up to 4 x Ei1529RC switches can be installed in a hardwired system along with a maximum of 16 x 3000, 2110e, 160e or 140RC Series smoke and heat alarms or 261ENRC Carbon Monoxide alarms
• The unit incorporates 3 switches marked ‘Locate’, ‘Test’ and ‘Hush’. These provide control features as detailed below and a mains check function as detailed below