Aico Ei161RC 230v Ionisation Smoke Alarm with Rechargeable Back-up and Base
- Part Number: Ei161RC
- Categories: Detection (Domestic Fire Alarm Equipment)
Please note: This product is now obsolete, and has been replaced by the Ei3016.
Aico Ei161RC 230v Ionisation Smoke Alarm with Rechargeable Back-up and Base
The Ei161RC is an ionisation smoke alarm that runs on a 230V AC mains power, and has built in tamper proof lithium cells that act as a battery back-up in the event of mains failure. These rechargeable Lithium cells are designed to have a ten-year life and outlast the life of the smoke alarm itself, whilst providing up to six months of smoke alarms operation without mains power. The alarm gives a fire warning adequate smoke enters the alarm. The alarm is supplied with the Easi-fit base that allows very quick and simple installation of the smoke alarm, combined with simple alarm head removal and replacement. The Easi-fit base automatically connects both mains power and battery as the detector slides on.
The alarm can be controlled remotely by either a “test, silence and locate” switch (Ei1529RC). If the alarm is connected to other Ei RC mains powered alarms then the whole system can be controlled remotely. Up to 20 alarms can be interconnected. The alarm has other advanced features such as built in circuitry to aid suppression of voltage transients and RF interference to further reduce the chances of false alarms under such conditions.
The alarm has a one person test feature which allows a person to test if the alarms are interconnecting. When releasing the test button, the other alarms in the system will continue to sound for a further 3 seconds so you can hear if they are linking. The alarm has a memory feature which will indicate if an alarm has been previously activated within a 24 hour period by flashing twice every 40 seconds.
Key Features
- Dual ionisation chamber sensor
- Temper proof rechargeable lithium battery back up
- Easi-fit base
- Remote control capacity
- Built in test / hush button
- Advanced suppression and calibration technology
- Interconnectable to other Ei mains powered alarms
- Memory feature indicated if an alarm has been previously activated
- One person test feature
- Low power cell warning
- Kitemarked to BS EN146040:2005
- 5 Year Guarantee
Have you got a question about this product?
Email us or Call Us on +44 (0)1254 207532

















