CST AC-HB-PROPR2-X AlarmCall Pro+ - BS5839-1 - EN54-4 - RS232 - Addressable

CST AC-HB-PROPR2-X AlarmCall Pro+ - BS5839-1 - EN54-4 - RS232 - Addressable

AlarmCall Pro+ contains a powerful 4W transmitter in a neat, wall-mounted enclosure. It provides great flexibility to installers and users to choose from a variety of paging and communication systems or to interface to currently installed or favoured systems.

AlarmCall Pro+ is compatible with many commercially available paging and data input protocols, including Protec, Scope, ESPA, Ascom, Notifier and Morley. It has 4 contacts as standard with a 32 contact module for expansion. It is able to send messages up to 200 characters in length and to transmit them over a wide area thanks to its high, maximum 4W, power output. It suits premise sizes from the smallest to the largest.

AlarmCall Paging Systems is the cost-effective monitoring systems that provide a real alternative to haemorrhaging money through reacting to false alarms. Based on a sophisticated paging system, AlarmCall Paging System immediately notifies the designated fire marshals exactly where the fire alarm has been activated. They then have a short time (agreed with the local Fire Service) in which to establish the validity of the alarm, prior to it reaching the 'Call Out' status. Working as a team, one marshal will go to the source of the alarm whilst the other goes on standby next to the central alarm panel. If, as in the case of 90% of fire alarms, the call is false, the marshals can communicate via phone or two-way radio and the 'Call Out' can be aborted.

IoT and SCADA

The AlarmCall Pro+ AC-HB-PROPR-X features set reduces the components required in a SCADA system.

Features includes: Digital and Analog I/O, Long Range Wireless I/O expansion and Modbus RTU/TCP protocol support

Operate as an IoT gateway allowing control and monitoring from devices supporting the MQTT protocol.

Key Features

• Up to 4W power output.
• Operates from 421 to 480MHz.
• Data transmit rates from 512 baud to 32K baud.
• Supported channel spacing of 25kHz, 12.5kHz and 6.25kHz.
• Sends and receives POCSAG paging messages.
• Transmit DMR tier 1 text messages.
• Receives FLEX™ paging messages.
• Two-Way paging, with auto acknowledge and request con­firmation message.
• Paging store and forward repeater operation with confi­gurable duplicate reject.
• Variable content macro which allows the TReX to build a periodic message with current system status, IO state and more.
• 8 digital inputs and outputs. Outputs can be open drain or relay depending on model.
• Two analogue outputs 0-10V/4-20mA
• Two analogue inputs 0-16V.
• Integrated spectrum analyser (optional).
• Simple to confi­gure back to back mirroring and monitoring of analogue and digital IO.
• Confi­gurable logging to SD card of all transmitted and received messages.
• Graphics display shows all transmit and receive activity including I/O state.
• Easily mountable from any side or to standard DIN rail.