Ciqurix FC-SFP-106 FCam Solo FP – 100m Fire Detection

Ciqurix FC-SFP-106 FCam Solo FP – 100m Fire Detection

The FCam Solo FP is the CORE version of the popular FCam Solo flame detection camera. Operating on the Ciqurix QLS protocol, it has punchdown cable termination and a cable entry gland suitable for "FP" fire resistant Cat 6 cable. It has onboard regulation to work with the 24v battery-backed power supply provided by a CORE hub.

Each Solo FP camera receives data and power through a single Cat6 cable connected directly to a CORE Control Hub or Extension Hub.

When used with the MHBB / EHBB CORE hubs and wired in fire-rated cable, the FC-SFP is designed to meet the requirements of BS5839-1:2017 and can be used as primary or sole means of detection.

All Ciqurix FCam cameras use Dual Lens Technology to detect flame at an early stage.

Visual analytics onboard the camera continually analyse the live video feed seeking flame. The analytics look at the colour, brightness, shape, flicker, movement and edge behaviour of potential flame, and compares this with previous images to spot developing fire.

At the same time, a separate high definition near-infrared video sensor provides an infrared video stream to a separate analytics engine, also onboard the camera. This operates in a specific spectrum associated with flame, and again is looking for brightness, shape, flicker, movement and edge behaviour over time.

Only when an incident looks like fire visually and looks like fire in the infrared spectrum does the FCam signal an alarm condition.

This allows the FCam to be extremely sensitive to fire and yet reject almost all false alarms.

The FCam knows what flame looks like in the dark, through smoke, and in fog - and can intelligently place more emphasis on the infrared feed in these conditions.

Key Features

• Detection Distance: 1 – 100m
• Viewing Angle: 46 degrees (h) 25 degrees (v)
• Detection Time: 10 seconds (typical)
• IP Rating: IP60 96%RH