C-Tec BF367 Auxiliary Device Isolator (single gang)

BF367 Auxiliary Device Isolator (single gang)

The BF367 allows a +24V d.c. output from a fire alarm control panel to be remotely isolated to prevent external equipment (such as auto diallers, roller shutter doors, etc) from operating. This is a particularly useful function during routine test and maintenance as it safeguards against the inadvertent and potentially hazardous triggering of auxiliary equipment.

To aid location, the BF367’s front label has a white ‘write on’ panel allowing installers to add their own personalised text such as equipment locations. The unit will fit on 25mm deep flush or surface mount back boxes.

Key Features

• The BF367 incorporates an isolating key switch and a high intensity amber LED
• The switch circuit has been designed so that if monitoring is used on the +24V d.c. output being controlled, a fault condition will show at the fire panel when the BF367’s key switch is in the ‘ISOLATED’ position (note that the key can be removed from the key switch in both the ‘ON’ and ‘ISOLATED’ positions)
• The unit’s amber LED can also be set-up to illuminate when the key switch is in the ‘ISOLATED’ position provided sufficient voltage is present
• Allows a +24 VDC output from a fire alarm control panel to be remotely isolated to prevent autodiallers, water sprinklers, rollershutters, etc., from activating
• Designed so that if monitoring is used on the +24 VDC output being controlled, a fault condition will show at the fire panel when the device is Isolated
• Label includes a white ‘write on’ area allowing installers to add equipment locations
• Fits on standard UK 25mm flush or surface mount back boxes