Cygnus CYG2 Fire Call Point Alarm

Cygnus CYG2 Fire Call Point Alarm

The Cygnus fire call point alarm operates using a single battery pack and can be used externally. This radio alarm device has also been designed as a standalone alarm unit. These devices are normally situated around a site in prominent places on main escape routes, stairwells and on, or near fire points where they are visible in case of an emergency.

This alarm has a 110 decibel sounder and an LED beacon for visual alerts. The call point is resettable and can be programmed with a sounder delay. Activating a call point will result in a site wide alert.

Key Features:

• IP65 rated
• Noise level at 110dB
• The CYG2 can be operated by using a single battery pack and it can be operated externally.
• Cygnus fire call point alarms are usually located in prominent areas on the work site where they can be easily accessed; for example, escape routes, emergency exits, stairwells, etc.
• These units should be located near fire points where they are visible in case of a fire or any other emergency.
• It has an LED beacon that provides visual alerts if there has been an emergency.
• The call point can be reset and you can also program it with a sounder delay.
• When the call point is activated during any emergency, a site-wide alert is sounded.
• Call point operated
• Resettable call point
• Powered by an alkaline battery pack