FFE Fireray 5000-001 Fireray 5000 Controller [EN]

Please note: The Fireray 5000 range is now obsolete with no direct replacements. If you require a new controller or detector, we recommend that you upgrade your full system to the Fireray 6000 range.

The Fireray 6000 alternative to this product is the FFE 6020-100 Fireray Hub Reflective System.

FFE Fireray 5000-001 Fireray 5000 Controller [EN]

A spare Fireray 5000 controller.

The Fireray 5000 Spare System Controller supports up to two Fireray 5000 beam detector heads.

The Fireray 5000 System is an auto-aligning, self-correcting infrared reflective beam smoke detector. Up to 2 detector heads can report to a single ground level controller. In addition, each system controller houses two pairs of fire and trouble relays, one per detector. Once the detector head is installed, using the easyfit mounting system an integral LASER can be activated. This allows the reflective prism to be located quickly and with confidence.

The Auto-Align function ensures proper alignment and maximum signal during the beam installation. AutoOptimise automatically steers and maintains the beam in the optimum position for reliable performance. The signal generated in the transmitter element and reflected by the prism back to the receiver element is analyzed for the presence of smoke. The internal microprocessor determines an alarm condition when a predetermined level obscuration is reached.

The system is designed to be mounted so the beam will project between 19” (0.5m) and 24” (0.6m) below the ceiling. Lateral detection may be up to 30ft. (9.144m) on either side of the beam, providing a maximum total coverage area of up to 19,800 square feet (60ft. x 330ft. or 18.29m x 100m). For installations complying with UL268/NFPA72, the maximum distance of Detector and Reflector from the ceiling must be 10% of the distance between floor and ceiling.

Key Features

• Spare System Controller (low level)
• Logs the 50 most recent events
• Programmable sensitivity and fire thresholds
• 20mm cable gland knock-outs on system controller
• 2-wire interface from system controller to detector
• Working optical path for detector alignment
• Ideally suited protecting large areas where use of traditional detectors would be difficult/costly to install
• 5 year warranty