FFE Fireray 3000-103 Fireray 3000 System [UL]

FFE 3000-103 Fireray 3000 System [UL]

The Fireray® 3000 End to End Infra-red Optical Beam Smoke Detector (OBSD) has been designed using the latest optical technology, incorporating modern industrial, electronic and software techniques. This detector offers cost effective protection of large, open area spaces with high ceilings.

The Fireray® 3000 is ideal for applications where line of sight for the IR (infra-red) detection path is narrow and where the building structure use reflective surfaces.

The projected beam type smoke detector shall be listed to U.L. 268 and shall consist of up to two transmitters, two receivers and a single low level remote control unit. The detector shall operate between a range of 16.5 ft. to 393 ft. (5m to 120m). The temperature range of the system shall be -4°F to 131°F (-20°C to 55°C). The receiver shall include an integral built-in laser pointer to assist in optimum alignment.

The beam detector shall feature automatic gain control, which will compensate for gradual signal deterioration from dirt accumulation on the lenses. The receiver heads shall incorporate a Wide Field of View to ensure the unit is always receiving maximum signal available. The system shall include a low level remote display and control unit with LCD read-out for set-up, reporting and testing of up to 2 separate sets of heads. The system shall be capable of sending separate Trouble and Alarm signals for each of the sets of heads. The system shall be capable of programming alarm thresholds of 25% to 60% in 1% increments. The system shall be capable of programming delay to fault and delay to alarm from 2 seconds to 30 seconds in 1 second increments.

Key Features

• Separate Transmitter and Receiver Heads
• Lateral Spacing per NFPA 72 is 60 feet
• Integral Laser Alignment in Receiver
• 2-wire Interface between Controller and Receiver
• Single and Twin Channel capability
• Separate Fire and Fault Relays per Detector
• Low Level Controller with LCD display
• Programmable Sensitivity and Fire Threshold
• Automatic Gain Control (AGC) for drift compensation
• Knockouts for ease of installation and wiring