Baldwin Boxall 4-way Disabled Toilet Alarm Control Panel DTA4

Baldwin Boxall 4-way Disabled Toilet Alarm Control Panel DTA4

Disabled toilet alarms are used as a method for people to call for assistance following a fall or other emergency. They are generally installed in disabled toilet cubicles; however, they can be used in other places such as bedrooms.

Our 4-way controller, together with our toilet alarm kits, forms a fully compliant (to BS8300), easy-to-use disabled toilet alarm solution.

The controller has many advantages over similar products on the market today.

Key Features:

• Independent call accept/acknowledge button for each toilet alarm connected.
• Monitored system, with fault LED to indicate if a ‘short’ or ‘open’ condition is detected.
• Independent fault indicators for each line.
• The panel has a built-in mains supply and is simply installed via a fused spur (3A switched) – connection to a separate power supply is not required. An LED on the panel confirms that the system is powered and available for use.
• Up to ten of the panels can be daisy chained for larger systems, without the need for any additional power source.
• A separate relay output enables connection to an external beacon – providing the opportunity to add a remote indicator to alert staff in a different area.
• Full compliance to BS8300 – with an acknowledge feature to reassure the caller that help is on the way (both audible and visual alarms change at the point of call when acknowledge button is pressed).
• The system has a programmable alarm ‘re-sound’ feature. This will operate if a call has been acknowledged at the control unit, but is not reset at the point of call within the specified time.
• Space to independently label each ‘zone’ for easy identification of the alarm call.
• Choice of a white or stainless-steel finish as standard.
• For ease of installation, the panel fits into a standard double gang back box (not supplied).