Aritech TX-6010-03-1 Wireless Smoke/Heat Sensor, 868MHz GEN2, EN14604:2005/AC:2008 and BS 5

Aritech TX-6010-03-1 Wireless Smoke/Heat Sensor, 868MHz GEN2, EN14604:2005/AC:2008 and BS 5

The TX-6010-03-1 is a wireless smoke / heat alarms, designed for use in a residential intrusion system with a compatible receiver understanding the 868AM Gen2 protocol.

The device has a test button surrounded by a status LED and a built-in sounder for alarm indication. The status LED flashes red every 45 seconds to indicate normal status (no alarm). When smoke or heat is detected (as configured), the status LED changes from flashing to continuously on, the built-in sounder is activated, and an alarm signal is sent to the control panel. 

The test button itself can also be used to silence the internal sounder in case of a low battery alert and is, of course, used when performing a sensitivity and alarm test. The test button can even be used to perform a remote monitoring station alarm test.

The device sends a supervisory signal to the receiver every 15-18 minutes to report its status.

Key Features:

• Option to select one technology only (heat or smoke) or both technologies (heat and smoke)
• Can also be used as a standalone detector
• Built-in sounder
• Test button surrounded with status LED
• 8 selectable sounder tones
• 5 years estimated battery life running on 2 batteries
• 2 additional battery slots available to further extend battery life
• EN14604:2005/AC:2008 and BS 5446-2:2003 certified