Apollo 45681-286MAR Marine Isolating Base

Apollo 45681-286MAR Marine Isolating Base

The Isolating Base senses and isolates short circuit faults on XP95 and Discovery loops and spurs.

Operation:

Under normal operating conditions, a low impedance is present between the –IN and –OUT terminals of the base, so that power and signals pass to the next base in line. If a short-circuit or abnormally low impedance occurs, the fall in voltage is sensed and the base isolates the negative supply in the direction of the fault.

The isolated section is tested using a current pulse every five seconds. When the short-circuit is removed, the power will automatically be restored. If it is a requirement that no device is lost in the event of a single short-circuit fault, every detector should be fitted to an isolating base. In applications where it is not necessary to use an isolating base for each detector, up to twenty detectors or equivalent surge current may be installed between isolating bases.

Key Features:

• Up to 20 detectors or their equivalent load, may be installed between isolating bases
• High-brightness LED
• Detects wiring short-circuits
• Minimises disruption from short-circuits