Aico RadioLINK Alarm Control Switch for Fire and CO Indicators – Ei412

Please note: This product is now obsolete, please contact us for further information.

Aico RadioLINK Alarm Control Switch for Fire and CO Indicators – Ei412

The Ei412 Remote Control Switch is designed for use with 2100, 160RC and 140RC series smoke and heat alarms on RadioLINK bases and also 260 series RadioLINK CO alarms. It will indicate if the source of alarm is smoke / heat or CO alarm. It increases the flexibility and user friendliness of the alarms by allowing the user to remotely ‘Locate, Silence and Test’ the alarms in the system:

• Locate – The source of the alarm
• Silence – Any nuisance alarms
• Test – The alarm system
• Alarm Memory – Identifies units that have previously alarmed (Useful for troubleshooting)

The switch is powered by tamper-proof Lithium cells designed to last at least 10 years (the life of the product). The switch uses advanced radio transmitter technology with unique ‘House Code’ feature to ensure robust signal transmission.

Technical Specification

• Units are supplied in factory code when received (they will communicate with all other RadioLINK models also in factory code). They must be ‘House Coded’ so that they will then only communicate with other units ‘House Coded’ at the same time.
• ‘House Coding’ –  With the Ei412 fitted in its final position, press the ‘House Code’ switch on the back of the unit and watch for the red LED to illuminate through the outer cover (under the ‘Test Alarm’ switch) then release the switch. The red LED will then flash to indicate the number of units it is coded with.
• Put each alarm in the system into ‘House Code’ mode by following the instructions supplied with the product. The Ei412 will transmit its own code to all othe units in range and will return to standby automatically after 30 minutes. Alternatively, press the ‘House Code’ switch to return it to standby immediately. Note: the red light flashes on the Ei412 indicate the number of alarms in the system.
• A RadioLINK Manual Call Point, Ei407, Repeater base, Ei420, Switched Input Module, Ei408, and a Remote Relay Module, Ei428 are also available for use in the system.
• Overall dimensions: 88mm x 88mm x 42mm deep – including mounting box supplied.
• Weight inclusive of packaging: 224g.
• 5 year guarantee.