Aico SAB300C 230V Xenon Strobe with Clear Lens

Aico SAB300C 230V Xenon Strobe with Clear Lens

The SAB300C is a mains powered Flashing Xenon Strobe. The Strobe connects into the Alarm system via a relay base or module such as the Ei428 or the Ei128RBU. If the Alarms trigger the relay will send out a signal that triggers the Strobe to flash at a 0.9Hz rate. The Strobe is an alarm accessory that is designed to give a visual warning if a properties alarm system has been triggered.

The strobe is weather protected to IP65 and can be used in all locations indoors and outdoors. There is a central grommet cable entry and detachable mounting base with 4 x 8mm side knockout pints.

Key Features

• Mains powered Strobe Clear Light
• Activated by relay module
• 0.9Hz flash rate
• 3 Watt Xenon tube
• For indoor or outdoor use
• Weather protected to IP65
• 230v AC powered, 15mA power consumption
• CE marked
• Can be used with the mains range of smoke and heat alarms via an Ei128R, eI128RBU, Ei158R or Ei428 relay to provide a visual warning of an alarm condition
• Central grommet cable entry and detachable mounting base with 4 x 8mm side knockout points
• 2 x 4.5mm screw fixing slots – 50-60mm centres
• Maximum cable size – 1.5mm² (recess mounting)
• Temperature range: -20°C to +40°C
• Fixing methods: BESA conduit box, single gang wiring box or direct
• Dimensions: Base diameter 85mm x height 81mm