Advanced MXP-549-12V 1.5A 12V EN54-4 PSE & Battery Charger Small Enclosure

Advanced MXP-549-12V 1.5A 12V EN54-4 PSE & Battery Charger Small Enclosure

The 12V power supply unit is available in the same enclosure as the existing 24V range and is suitable for use with a wide range of control equipment, such as communication and paging equipment, requiring an EN54-4-approved power supply when used in fire alarm applications.

Suited for almost any application, the power supply unit/battery charger has been developed using the latest surface mount technology to provide a high-efficiency switch mode power supply.

The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.

Key Features

• Suitable for use with a wide range of control equipment
• 12V supply (1.5A only)
• High efficiency switched mode power supplies
• Input Supply (AC): 230-240V AC, 50/60Hz, fuse T3.15H250
• Output Voltage (DC): Max 14.25V DC, Min 9.0V DC at minimum battery voltage of 10.6V with mains disconnected
• Charging Voltage: 13.7 V DC nominal at 20°C
• Output Current: 1.15A continuous load, 0.35A battery charge
• Dimensions (H x W x D): 246 x 263 x 85mm
• Environment: Indoor, Dry
• Fault Output: Volt-free change-over contacts rated 1A @ 30V DC
• On Board Indication: Mains Fail, Charger Fail, Battery Open Circuit, Battery Low & Heartbeat