Advanced 1-2 Loop MxPro4 Fire Control Panel with 2 Loop Cards MX-4202 (Apollo / Hochiki Protocol)

Please Note: This product is no longer available. The recommended replacement is the Advanced 1-2 Loop MxPro5 Fire Control Panel with 2 Loop Cards MX-5202 (Apollo / Hochiki Protocol).

Advanced 1-2 Loop MxPro4 Fire Control Panel with 2 Loop Cards MX-4202 (Apollo / Hochiki Protocol)

The MX-4202 comes fitted complete with 2 internal loop driver card and 2 on-board sounder circuits. The control panel consists of a simple to use LCD menu driven graphical interface, dual, flash-based microprocessor technology driven by an board 24V DC, 2 Amp High Efficiency Switched Mode power supply and charger approved to EN54 parts 2 & 4.Dedicated system navigation keys makes learning this control panel user friendly as well as installer friendly due to the uncomplicated, trouble free, commissioning and fault finding.

Powerful Cause and Effect programming coupled with 'DynamiX' zoning makes the panel suitable for a wide range of site applications, from small to large complex multi area systems. Fully on site programmable via on board alphanumeric keypad or PC -Net Configuration tools.

Key Features:

• Fully expandable from 1 to 2 loops via common plug in loop driver boards.
• Full support of Apollo (Discovery, Xplorer S90 & XP95), Hochiki ESP, Nittan Evolution and AV protocol.
• Advanced graphical LCD user interface with up to 1000 fire zones as standard, allowing full EN54 compliance without additional hardware or LED indication.
• 4 Amp power supply and charger to EN54 part 4.
• Dedicated RS232 serial port for direct PC or modem connection.
• Dual, flash based, microprocessor technology with on-board Real Time Clock.
• Optional on-board or remote printer.
• Installer friendly Auto-learn and Loop Detection facility for trouble free, commissioning.
• Fully on-site programmable via on-board alphanumeric keypad or PC configuration tools.
• Flash memory and the advanced graphical display enables the panels to be configured to operate in virtually any language with any character set and allows the installer's logo and company details to be applied to the LCD display.
• Robust, removable equipment chassis with plug-in connectors for simple fixing and cable termination.
• When connected to the fault tolerant Ad-NeT network, the panel operates as a true peer-to-peer interface (with up to 1000 shared zones)

Please Note: After careful analysis of the features and benefits across the MxPro 4 and MxPro 5 ranges, Advanced Electronics have decided to remove a number of MxPro 4 options where they are also available on the MxPro 5.

The MX-4202 is still available however, the MX-4202/D is no longer available, a suitable alternative is the MX-5202/D