Yuasa 12V 24AH Battery Inverted Terminals (NP24-12)

Yuasa 12V 24AH Battery Inverted Terminals (NP24-12)

The Yuasa NP Series batteries set the standard for quality and excellence in the field of rechargeable batteries. These high-quality batteries ensure that no electrolyte leakages occur from the case or terminals. The NP series range is almost maintenance-free with the perfectly sealed construction and the recombination of gases within the cell.

The NP series offers a unique electrolyte suspension system incorporating a microfine glass mat (AGM) to retain the maximum amount of electrolyte in the cells. The valve regulated design of this battery is equipped with a safe low-pressure venting system, which releases excess gases and automatically reseals should there be a build-up of gas within the battery due to overcharging.

Key Features

• EUROBAT Classification: 3 to 5 years 'Standard Commercial'
• General purpose VRLA battery
• Lead Calcium Grids for superior life
• Absorbed Glass Mat construction with no free acid
• Gas recombination
• Manufactured world wide
• Good recovery from deep discharge
• Operation in any orientation (excluding continuous inverted use)

Installation - Can be installed and operated in any orientation except permanently inverted.

Handles - Batteries must not be suspended by their handles (where fitted).

Vent valves - Each cell is fitted with a low pressure release valve to allow gasses to escape and then reseal.

Gas release - VRLA batteries release hydrogen gas which can form explosive mixtures in the air. Do not place inside a sealed container.

Recycling - YUASA’s VRLA batteries must be recycled at the end of life in accordance with local and national laws and regulations.

Technical Specification

• Capacity at 20-hour Rate (Ah): 24
• Capacity Ah (20-HR): 24
• Length (mm): 166
• Width (mm): 175
• Height (mm): 125
• Total Height (mm): 125
• Weight (kg): 9
• Nominal Voltage: 12
• Capacity Ah: 24