Scope Connexions CX5E High Power Mains Powered Transmitter with Ethernet Module

Product Code: CX5E

Please Contact Us for Price & Availability.

Please note: This product is no longer available, please contact us for further information.

Scope Connexions CX5E High Power Mains Powered Transmitter with Ethernet Module

The Connexions System has always provided the latest in on-site paging technology at a realistic price, its modular design concept allows you to buy the basic unit and to add to it as your company’s needs change so the initial outlay is kept to a minimum.

Flexibility has always been the key word with the Scope Connexions Systems, with its modular high-performance interfaces enabling robust connectivity to many host devices. They include connection to internal telephone, PC network, RS232, RS485, USB, dry-contacts and voltage triggers. There is also an internal protocol conversion option, which enables the translation of incoming RS232 data from host hardware into paging data, providing paging from various fire, intruder, nurse call, building management systems etc.

The basic unit has two RS232 ports and eight dry contact inputs, which enables the system to be hard wired to anything from an alarm control panel to a front door bell to alert prescribed users in the event that required criteria occur. All Connexions systems are supplied configured with default settings and are able to support up to 4-digit pager numbers as standard (9999), so expansion is already built in.

The transmitter is designed to work at UHF frequencies which give an incredibly high degree of reliability in terms of the signalling success within a commercial environment, whilst using very small and unobtrusive aerials. It uses the same international standard digital signalling system (POCSAG) deployed by most wide area paging companies. This is accepted to be amongst the most sophisticated and reliable in the world.

Key Features:

Benchmark UHF radio paging system
Available with two or three serial ports
Eight on-board volt free trigger contacts
Optional telephone interface
Optional Ethernet card
Can be driven by a PC, either standalone or via a network
Optional protocol conversion software allows connection to almost any fire, security or nursecall panel
Mains powered and DC models are available
Models with 1 watt or 5 watt RF output
Ranges of up to 2 kilometres from 1 watt transmitter with ¼ wave aerial
Units with internal PSU: CX6: 90-240V AC <0.5A 50/60Hz Mains – CX5: 90-240V AC <0.8A 50/60Hz Mains
Units without PSU: CX6DC: 12-14V DC 1.5A minimum – CX5DC: 12-14V DC 3.0A minimum
RF Output Power: CX6: Up to 1 watt max – CX5: Up to 5 watts max [2W max ERP using 459MHz paging band in the UK)
Frequency Range: CX6: 446.000MHz - 469.700MHz – CX5: 446.000MHz - 464.000MHz