Klaxon SWG-0028 FP6 ATEX Motor Siren - 400VAC - 50Hz

Klaxon SWG-0028 FP6 ATEX Motor Siren - 400VAC - 50Hz

The FP6 is a flameproof version of Klaxon's wide area siren, providing effective signalling over large distances.

Utilising a traditional siren sound, it provides a recognisable alarm and is often used for critical alarms such as toxic gas release and disaster warning.

Certified to EExd llC T4, the FP6 is manufactured from cast aluminium and will give a very long life when mounted outdoors. Powered by a 3-phase motor it is designed for roof or pole mounting. Using appropriate control equipment, the siren can produce two distinct tones for different types of alarm.

Key Features

• Audibility range between 135db @ 1 metre
• 475Hz constant tone signal
• ATEX approved for zone 1 & 2
• Overall siren standard approval Exd IIG IIC T4
• Non electrical parts standard approval EExc IIC T1 T6 X
• Roughly omni-directional sound coverage which peaks in the direction of the front stator face
• 400Vac +/- 10% 50Hz 3 phase nominal power supply requirement
• Operating temperature range for the FP6 & FP10 units of -20 to +60 degrees C
• Cast aluminium & steel construction
• Environmental rating of IP55
• If the power supply to the sirens is pulsed to enable the siren to produce a ‘wail’ tone then the maximum run time of the siren is reduced from continuous for constant tone to 15 minutes or less
• Control units can be supplied to enable the siren to produce the ‘wail’ tone signal with associated control switches. The controls are only suitable for locating in a non-hazardous area
• The Motor windings are tropicalized as standard
• Anti-condensation heaters for the motor can be supplied
• The standard siren builds offered are fitted with EExde rated motors
• High output siren sound (135dB)
• Rugged weatherproof construction