Tyco 516.800.954 SAM800 MX Sounder Addressable Module

Tyco 516.800.954 SAM800 MX Sounder Addressable Module

The Sounder Base Addressable Modules (SAM800/SAB800/SAB801) are designed to control a loop powered sounder base for use with the MX system, two variants (SAB800/SAB801) includes an integral beacon. They may also be used to drive a relay base.

The units are used to provide the address decoding in place of a detector, thus providing a loop powered sounder beacon when used in conjunction with a Sounder Base. These modules are colour matched to the sounder bases and are locked into the base using the locking device integral to the sounder base. The SAM800 is suitable for wall or ceiling mounting as standard, but has no integral LED or remote LED drive.

Features

• Allows the 801/802/812/901 & 912 Sounder Base to become Addressable without the need to fit a Detector, thus creating an Addressable Loop Powered Sounder
• Suitable for wall or ceiling mounting
• Sounder Selection Tones as per 801/802/812/901 & 912 Sounder Base
• Fits the 801RB Relay Base to provide an Addressable Relay Base without the need to fit a Detector
• Colour matched to Sounder Bases
• Locked into Sounder Base using Detector Locking Pin
• SAM 800 is configurable in CONSYS
• SAB800 / SAB801 may be used with 5B or MUB bases
• SAB800 / SAB801 adds a Flashing Red Beacon facility to the 801/802/812/901 & 912 Sounder Base
• SAB801 Low current consumption (loop powered)
• SAB800 has two Modes of Operation - continuous or 2Hz flash, configurable in CONSYS
• SAB801 has two Modes of Operation - continuous or 1Hz flash , configurable in CONSYS