Ziton ZP755HA-2 Addressable Horn Sounder
ZP755HA-2 is designed with dual front and rear sound paths, providing an 'all around' sound output - ideal for open area coverage.
Installed directly onto and powered by the ZP wiring loop - ZP755HA-2 enables the system designer to offer a complete ZP3 analogue addressable system on a single pair of wires. Installation time and costs are further reduced as the moulding plugs directly into a first fix base - eliminating the need for any internal connections.
The units high efficiency acoustic design, together with a low energy, 'sound gun' transducer, enables up to 40 sounders to be connected to a one kilometre loop of 1.5mm2 cable, with a wiring run of 50 metres to the first device.
Continuous, intermittent and two-tone outputs are available, from which any combination can be chosen to provide alert and evacuate, two stage alarms. Sound types comply with most international codes (e.g. BS 5839 Part 1 recommended frequencies).
The ZP755HA-2 produces a sound output of 102 dBA tested at 1 metre. The volume setting can be reduced for areas where a lower sound output is required.
Moulded in high impact thermoplastic, the sounders are available in either red or white.
Features
- Wide 'all around' sound distribution
- Microphone self test facility
- Plug in base - no internal connections
- Up to 40 sounders directly on the loop wiring
- High efficiency sound gun transducer
- Synchronised outputs
Download Ziton ZP755HA-2 Data Sheet.pdf
Contact us about this product
Tell a friend about this product
