Ziton ZC3 Conventional Panel
The ZC3 range of conventional panels features control and indication facilities for 2, 4, 8, 16 and 32 zone systems. Up to a maximum of 32 automatic detectors and/or manual call points can be connected to each zone.
Complying with the requirements of EN54 Parts 2 and 4, the ZC3 range is approved by several certification bodies including the Loss Prevention Certification Board (LPCB) and is ideal for systems designed to meet a variety of local codes.
All units are housed in robust yet attractive metal enclosures, incorporating a door mounted display panel, providing user controls and indications. ZC3 panels are compatible with all ZC conventional detection devices. Zone wiring is fully monitored for open, short circuit and detector removal, with head out continuity.
Panels are provided with four monitored alarm circuits (two only for the two zone version), with an output of 0.5A each for the two and four zone models and 1.0A for the larger sizes. All sounder circuit wiring is fully monitored for open and short circuit faults. A common 24Vdc auxiliary supply is included, together with common outputs for both fire and fault.
Standard facilities include class change, non latching zones (configurable on any zones), one man walk test for both detector and sounder circuits, a configuration programme including various delay modes and alert sounder pulsing in non alarm zones. A lamp and panel buzzer test facility is also included on all panels.
Access to operator level is via a control enable key, located on the front of the panel. A second separate key is required to open the panel enclosure for access to the engineering level.
Up to five matching 2 to 8, 16 and 32 zone repeat panels can be connected to each appropriate sized main panel via the panel auxiliary supply, repeater interface card (ordered separately) and screened, two wire, serial links. 24volt d.c. supply is by a further two core connection from the main panel.
The ZC3 panel range represents excellent value for either new or refurbished installations where conventional, cost effective equipment is specified
Features
- 2, 4, 8, 16 and 32 zone versions
- 4 alarm circuits (4 zones and above)
- Up to 5 repeaters on a serial link connection
- Class change, remote input facility
- Selectable non latching zones
- One man walk test on both detector and sounder circuits
- Programmable delay modes
- Sounder pulsing in non latching zones
Download A020 - ZC3 Conventional control panels.pdf
Contact us about this product
Tell a friend about this product
