Kentec Sigma CP Sounder PCB
Ref: K461
Additional:
PSU Size:
Kentec Sigma CP Sounder PCB
The Sigma CP Sounder Board is compatible with all Sigma CP control panels which have operating software version V3.0 or above. The board provides 8 additional sounder outputs which can be configured as zoned, 2-stage or common alarm. All sounder outputs are open and short circuit monitored and any faults on the sounder outputs will be announced at the main fire alarm panel as a sounder fault.
Features
- Two wire serial connection
- Up to 7 sounder boards per system
- 230V AC or 24V DC powered versions
- Zoned, 2-stage or common alarm
- All outputs monitored for open and short circuit faults
- Individual open and short circuit fault indicators
- Fully monitored by main control panel
- Class change input facility
- Up to 8 outputs with 0.5A available from each
- Can be connected to serial bus with Ancillary boards and repeaters
- Boxed units in enclosure to match Sigma CP control panels
- Power fault input for monitoring remote power supplies
Download Sigma Sounder Data Sheet.pdf
Download Sigma Sounder Manual.pdf
Contact us about this product
Tell a friend about this product
