FIM802 field interface module (two MX loop driver)
The Field Interface Module FIM is the main interface for field wiring on MX detection panels and contains plug-in field wiring terminals, inter board connectors, EMC protectors and filters and general I/O electronics. The FIM801 provides 1 x MX DIGITAL loop and the FIM802 provides 2 x MX DIGITAL loops. Each MX DIGITAL loop can support several kilometers of loop wiring using a mixed topology using multiple loops and spurs.
The FIM provides up to 495mA of loop power to each loop to drive loop powered sounders and other loop power devices. An optional plug-in additional loop cards (XLM800-MX) provide up to 8 x MX Digital loops.
The FIM incorporates the following local I/O connections:
2 reverse polarity monitored sounder outputs
2 x volt free outputs (Default alarm and fault)
1 monitored input (eg. Day/Night changeover)
1 emergency alarm input
1 unmonitored input (eg. Class Change or tamper)
Full monitoring of PSB800 power supply
Ground fault monitoring
The FIM incorporates a local I/O bus which allows the local I/O connections to be increased by 24. A variety of I/O expansion boards are available including:
The FIM includes two connections to the RBUS one for the local user interface and one for connecting up to 15 remote addresses in the form of up to 2 x operator control modules (OCM800) or up to 15 multi-purpose modules (MPM800).
The FIM provides 3 configurable external serial ports:
Contact us about this product
Tell a friend about this product
